Award Metals - Ventilation Metals

1. Half Round Dormer Vents
Square Back	Pointed Back	Tile Hem
Deadsoft Aluminum	Copper by Special Order	9" x 18" 28.47 square inches of net free air Regular, Deadsoft, Aluminum or Copper 12" x 24" 50.19 square inches of net free air Regular, Tile, Deadsoft, Aluminum or Copper

2. STEALTH ® Low Profile Vent - ICC Evaluation: ER-5364
	24” = 40 sq. in. 30” = 53 sq. in. 36” = 66 sq. in. 48” = 90 sq. in.	Go to Low Profile Vent Page

3. STEALTH ® Metal Ridge Vent - ICC Evaluation: ER-6171
	Hurricane Tested to 110 M.P.H Dade County Tested Test procedure PA 100 (A-95) For wind and wind driven resistance to 110 M.P.H. under 8.8 inch per hour rainstorm.	Go to Metal Ridge Vent Page

4. TRUE 38 Roof Vent
	38 square inches of net free air Base - 16-1/2" x 16-1/2" Hood - 10-1/2" x 10-1/2" Height - 4"	5" High Collar for Shake or Tile 8" High Collar for Hot Mop Pre-Painted, Aluminum Zinc, or Award Stonecoat Go to True 38 Page

5. NIFTY-fifty Roof Vent
	50 square inches of net free air Base - 15" x 18" Hood - 12" x 12" Height - 4"	Made of High Impact Resins Go to Nifty-fifty Page

6. Pentagon Dormer Vent
	68 square inches of net free air 13" x 19"	"S" Tile, Flat Tile or Composition

7. Eyebrow Dormer 1/4" Screen
	48.75 square inches of net free air	4" x 19" Opening Regular or Shake Base Aluminum Zinc or Galvanized Sub-Base Flashing Available

8. Gravity Vents
	133 square inches of net free air	12" x 12" Screened Galvanized

9. T-Tops
	4" & 7" Round 6" x 6" Square	Open End or with End Caps Aluminum-Zinc, Galvanized or Copper Dead Soft Aluminum

10. China Caps
	4" to 24"	Galvanized

11. Combo Vent Horizontal
	4" x 10", 4" x 12", 4" x 14"	Regular or Shake Base Galvanized

12. Combo Vent Vertical
	4" x 10", 4" x 12", 4" x 14"	Regular or Shake Base Galvanized

13. Aluminum Code Caps Round
	3" to 10" Round	Regular or Shake Base Deadsoft Base up to 8"

14. Aluminum Code Caps Oval
	4" Horizontal or Vertical	Regular or Shake Base Deadsoft Base up to 8"

15. 1-Piece Roof Jack
	4", 6", 8"	Regular & Shake Base

16. 2-Piece Roof Jack
	3"-4", 5"- 6", 7"- 8", 10"-12"	Regular & Shake Base Sub-Base Flashing Available

17. Eave Vent - 1/4" Screen
	3.5" x 22" 43.68 square inches of net free air	3.5" x 14" Ear Out 3.5" x 22" Ear Out 5" x 22" Ear Out 1/4" screen

18. Ready-Vent ® - Foundation Vent
	Poured-In-Place Foundation Vent 8" x 16" Opening Gray for wall sizes: 6", 8", 10", 12" With or without 2 Doors 73 square inches of net free air	3"-4", 5"- 6", 7"- 8", 10"-12" U.S. Patent #6,165,066 See the Local Building Code for installation requirements. More Rap-I-Form® Products

19. Square Sub Base Flashings
	9" x 18" - Opening 10" x 10"	12" x 24" - Opening 14" x 14"

20. Round Sub Base Flashings
	Openings: 3"- 4", 5"- 6", 7"- 8"	17-1/2" x 17-1/2"

21. Low Profile Sub Base Flashings
	STEALTH ® 24", 30", 36" , 48"	4” x 19” Eyebrow Dormer

22. Gable End Louver Rectangular

14" x 8"

14" x 12"

14" x 18"

14" x 24"

Copper by Special Order

F.O.F., F.O.B., P.G.
Galvanized Flush or Plaster Ground

23. Gable End Louver Round
	14" or Larger Special Order Only	Copper by Special Order F.O.F., F.O.B., P.G. Galvanized Flush or Plaster Ground

24. Vent Caps
	3", 4", 5", 6", 7" or 8"	4" Oval Cap by Special Order

25. Rotary Vents
	8" to 48" Galvanized	Base Made To Pitch

26. Wall Mounted Dryer Vent
	4" or 5" Wall Mounted Dryer Vent 2" Flange	Galvanized or Copper

27. Roof Mounted Dryer Vent
	4" or 5" Round Roof Mounted Dryer Vent with Flapper	Available in Copper

28. Wall Cap

4" or 7"

With Screen 2" Flange

Galvanized or Copper

29. Metal Stem Vent
	Bathroom Vent with Flapper	Shown in Award Stonecoat finish

30. Stamped Louver Vent
	19.55 square inches of net free air	6" x 14" Galvanized Stamped Louver Plaster Ground

31. Stamped Mesh Vent
	42.12 square inches of net free air	6" x 14" Galvanized or Copper 1/4" Stamped Mesh Plaster Ground

32. 1/4" Screen Vent
	64.90 square inches of net free air	6" x 14" Galvanized 1/4" screen Plaster Ground

33. Snow Splitter Vent
	1" - 2" or 3" - 4"	Galvanized

34. Storm Collar
	3" to 6" Fixed and Adjustable	Galvanized

35. Tub Access Doors
	14" x 14" Piano Hinged, Strap Hinged 1/2" or 3/4"	Plaster Ground or Galvanized

36. Tie Plates
	3" x 9" 3" x 12" 3" x 18" 3" x 24"	18 Gauge

37. Access Able® Multifunctional Access Panel
	Access Able’s, multi-functional access panel boasts an impressive, high performance patented design. Our superior product is used wherever wall and ceiling access is needed.	Go To Access Able® Page

38. DBX1000™ Dryer Vent and Gas Line Receptacle
	Available in 4" or 6" depths. Dryer Vent and Gas Line Receptacle *Go to the DBX1000™Page*

Most Award Metals Ventilation Products are available in:

AWARD STONECOAT™